RCA Audio Cable Adapter for XBOX 360 + Slim

I have a perfectly functional cable, which works great when used with an HDMI cable, but it took about 5 minutes of soldering. If you aren't comfortable with this, don't buy this product, as it likely won't work correctly out of the box. If you do purchase, you can fix it by following the steps below.

NOTE: If you break your Xbox, it's your fault and only your fault. If you burn your house down or your finger with a soldering iron, it's your fault and only your fault. Proceed at your own risk.

1) Check the cable... there is a chance it will be wired correctly when you get it. If so, lucky you :-) Make sure you try changing the TV HDMI input to another input, then back to the XBOX. If the XBOX resets, sorry, you need to plug in your soldering gun.

2) Open the plastic on the end of the plug that goes into the Xbox. You might need to tape it closed later, as it tends to break. Not a huge deal, as this won't kill the plug, just make it a...Read more

I actually use this in conjunction with a pair of Turtle Beach X4's. I am fortunate to own an Onkyo 7.1 Surround Sound system (can be found for a great price if you dig a little online) however there are certain times, usually at night when she is asleep on the couch, that my wife just prefers I use headphones will gaming. So since my Onkyo receiver is capable of doing both HDMI Audio and Video, I use the optical connection on this adapter to go straight into the Turtle Beach receiver. So for that purpose, it works like a champ.

It will of course also work if you have a receiver that only does HDMI video but not audio as well.

The only thing I will say is when I purchased this a few months ago, I recall paying no more than $15 for it, and that included shipping, so buyer beware, it appears that some people are taking advantage of the fact that this is a somewhat hard to find item. However shop around if need be, as a $34 asking price is just absolutely...Read more

This cable does the trick with one major flaw. It is not wired correctly and the xbox360 will reboot if you switch inputs on your display.

For example, if you have a cable/satellite box in tv hdmi input 1, and the xbox is on tv hdmi 2, then if you switch from the xbox to watch tv and return to the xbox the xbox will reboot.

This is a known problem on lower quality cables because they are missing a ground. This cable can be modified, but you have to crack open the casing, and solder in an additional wire. This is not a tv or setup problem. Its a known issue and you can easily find more info on it on the net.

This problem makes it very difficult to pause a game for long periods and return to it. So i have to give this a low review, because a cable either completely works, or it doesn't work at all...